What Is a PRP Kit? Components, Tube Configurations & What's Actually Inside
AdminMy StoreShare
Reading time: ~8 minutes | Target audience: Clinic owners, procurement leads, aesthetic practitioners evaluating PRP consumables
Last updated: Nov 12, 2026
Introduction
"PRP kit" is one of the loosest terms in the regenerative medicine supply chain. It is used to describe a box of collection tubes, a vacuum-assisted separation device, a centrifuge bundled with consumables, and occasionally a complete procedure tray. Two suppliers can both sell a "PRP kit" that share almost nothing in common.
That ambiguity matters at the point of purchase. If you do not know what the word covers, you cannot compare two offers, and you cannot tell whether a cheaper kit is cheaper because it contains less or because it is built to a lower standard.
This page defines what a PRP kit is, what it typically contains, where the boundary sits between a kit and plain tubes, and which parts of a kit actually affect the preparation.
1. What a PRP kit contains
A PRP kit is a single-use package of the consumables required to draw, separate and deliver autologous platelet-rich plasma in one procedure. The tube is the component that determines separation quality; everything else in the box exists to move blood and plasma between containers without contaminating either.
| Component | Function | Always present? |
|---|---|---|
| Collection tube(s) with anticoagulant and/or separation gel | Draws whole blood, then separates plasma from the red cell layer under centrifugation | Yes — this is the core of the kit |
| Blood collection needle and holder | Venepuncture and tube filling under vacuum | Usually |
| Syringe and transfer needle | Aspirating the plasma layer after the spin | Usually |
| Injection needle or blunt cannula | Delivering the finished PRP to the treatment area | Varies — often purchased separately by gauge preference |
| Alcohol swabs, gauze, tourniquet | Basic asepsis | Varies |
| Procedure tray or sterile drape | Keeps the working field organised | Varies |
The variation is in the second half of that table, not the first. A kit that contains only tubes is still a legitimate product — many clinics buy tubes in bulk and source needles, syringes and cannulas from their existing consumables supplier at better prices and in the gauges their practitioners already prefer.
2. Kit vs direct-supply tubes
These are two purchasing models for the same underlying device, not two different technologies.
A kit bundles the consumables for one procedure into a single sterile package with one lot number. It is convenient, it reduces the number of stock items you track, and it makes per-procedure cost easy to calculate. The trade-off is that you accept the supplier's choice of needle gauges, syringe sizes and quantities.
Direct-supply tubes means buying the collection tubes alone, in boxes, and assembling the rest of the tray yourself. This is normal for clinics that already run a standard consumables inventory. It is usually cheaper per procedure and gives full control over needle and cannula selection, at the cost of more stock-keeping and the need for your own aseptic tray setup.
Neither model is better in the abstract. What matters is that the tube inside the kit is the right tube for your protocol — the packaging around it does not change the separation physics.
3. What a PRP kit is not
Three things get folded into the word "kit" in marketing material and should not be:
A centrifuge. A centrifuge is a reusable device, not a consumable. When a listing describes a "starter kit" that includes a machine, it is selling a bundle of a durable device plus consumables. Those are separate purchase decisions with separate failure modes — see our guide to starter kits that include a centrifuge for how to evaluate the device half.
An activation agent. Some protocols activate PRP with calcium chloride or thrombin before application. Those reagents are pharmaceuticals or laboratory reagents, not part of a collection kit, and where they are used they are governed by their own documentation.
PRP itself. The kit produces a separation; the platelet concentration you obtain depends on the blood drawn, the anticoagulant ratio, the centrifugation force and the aspiration technique. No tube specification replaces a validated protocol.
4. The tube configurations a kit can be built around
Kits differ most in which tube chemistry they are built around. All four configurations below are available across our range, and all share a 16 mm outer diameter — what changes between them is the anticoagulant, the presence of a separation gel, and the tube length.
| Configuration | What the tube contains | Available volumes |
|---|---|---|
| ACD-A + gel separator | Acid citrate dextrose anticoagulant plus a thixotropic density barrier | 8 ml, 10 ml, 12 ml, 15 ml |
| Sodium heparin + gel separator | Heparin anticoagulant plus a density barrier | 8 ml, 10 ml |
| GFC | Growth factor concentrate configuration | 10 ml |
| PRF, additive-free | No anticoagulant, no gel — clotting is the mechanism | 10 ml, 12 ml, 15 ml |
The anticoagulant choice changes how platelets behave and how long the preparation stays usable; the full comparison across ACD-A, sodium citrate and heparin is covered in PRP tube anticoagulants compared, and the broader taxonomy in PRP tube types explained.
Volume matters for a different reason: tube length is what the centrifuge rotor constrains. An 8 ml or 10 ml tube measures 16 × 100 mm; a 12 ml or 15 ml tube measures 16 × 120 mm. A rotor that accepts the shorter tube will not necessarily accept the longer one. If you are choosing a kit size for the first time, check the rotor before the volume — the fit table in our tube and rotor compatibility reference maps each configuration to the rotors it seats in.
5. How to read a kit listing
Five figures should be explicit on any kit specification. If they are not stated, ask before ordering.
- Tubes per procedure. A "20-piece kit" may mean twenty tubes or twenty items including swabs. Ask for the tube count specifically.
- Tube volume and dimensions. Volume alone is not enough — 10 ml at 16 × 100 mm and 12 ml at 16 × 120 mm are different rotor fits.
- Sterilisation method and shelf life. Terminal sterilisation should be declared with the method (ethylene oxide or gamma irradiation) and the remaining shelf life stated at the point of shipping, not at the point of manufacture.
- Lot traceability. Every tube carries a lot number. A kit that does not let you record the lot against the patient procedure breaks the traceability chain you would need in an audit.
- Device classification. Collection tubes intended for preparing autologous material for re-injection are medical devices, not in-vitro diagnostic laboratory tubes. The distinction is not cosmetic — it determines what the manufacturer is allowed to claim and what documentation should exist. See our CE marking guide for the documents to request.
A kit priced well below the market is almost always thinner on one of these five, most often the last two.
6. Which kit topic to read next
This page covers composition. Two adjacent questions are handled elsewhere: how to choose a PRP kit sets out the five clinical parameters that should drive the decision, and PRP kit cost analysis works through total cost of ownership rather than sticker price. The consolidated index sits in our PRP kits guide.
Frequently asked questions
Is a PRP kit the same as a PRP tube?
No. The tube is the device that performs the separation. A kit is a package that contains tubes plus some or all of the surrounding consumables. The tube specification is the part that determines the quality of the preparation; the rest is convenience and logistics.
Can I use a standard blood collection tube instead?
Not for preparing material intended for re-injection. Standard diagnostic tubes are authorised for in-vitro laboratory analysis, are not manufactured under cleanroom conditions intended for injectable use, and are not validated for endotoxin limits. The regulatory and practical differences are set out in FDA-cleared vs CE-certified PRP systems.
Do I need a kit, or can I buy tubes in bulk?
Bulk tubes are the more common choice for established clinics, because needles and syringes are already stocked and can be bought at better prices in the exact gauges the practitioners prefer. Kits are more useful for a new clinic setting up its first protocol, or for practices that want a single lot number covering the whole procedure.
Does the kit include the centrifuge?
Usually not. Where a listing bundles a centrifuge, treat it as two purchases: a reusable device and a consumable supply. The device should be assessed on rotor capacity, maximum RCF per rotor and tube fit — not on the price of the bundle.
How many tubes should one kit contain for a single treatment?
That depends on the volume your protocol delivers and the area being treated, not on a fixed rule. A 10 ml tube yields roughly 2–3 ml of PRP, which typically covers a full-face session; larger areas or combined face-and-neck protocols need more starting volume. Our guides to facial protocols and hair restoration protocols set out the volume mapping for each application.
Disclaimer: This page provides product and specification information for healthcare professionals and procurement teams. It does not constitute medical advice and does not describe a clinical protocol. Centrifugation settings and treatment parameters must follow your own validated protocol, the device instructions for use and local regulatory requirements.
Related reading: PRP kits guide — the hub page for kit composition, selection and cost · How to choose a PRP kit — the five clinical parameters · PRP kit cost analysis — total cost of ownership · PRP tube types explained — ACD, heparin, gel, GFC and PRF.
For CE-marked, ISO 13485-manufactured PRP collection systems supplied as kits or as tubes alone, browse the PRP kit collection or contact our team with your rotor model and protocol volume.